home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Turnbull China Bikeride
/
Turnbull China Bikeride - Disc 1.iso
/
ARGONET
/
PD
/
MODULES
/
ROMPATCH
/
RISCOS36.SPK
/
userdocs
/
!ReadMe
next >
Wrap
Text File
|
1997-03-04
|
3KB
|
79 lines
ReadMe for ROMPatch version 2.02, 4 Mar 97
-------------------------------------------
This release of ROMPatches fixes some problems with RISC OS 3.60 and
with 3.70. It supersedes ROMPatch 2.01 for RISC OS 3.70 (and provides
additional patches).
Purpose of patches
------------------
The problems fixed are briefly as follows:
1) 3.70: Slow printing to some HP printers on parallel port. (Same
as ROMPatch 2.01)
2) 3.70: Occasional "No stack for trap handler" on some StrongARMs
(SA110, revision less than 3). (Same as ROMPatch 2.01; see
TechNote for advice for code developers.)
3) 3.70: Errors from some applications using several in-memory
transfers (SWI Wimp_TransferBlock) in succession.
4) 3.60,3.70: Crashes for very large in-memory transfers between
applications.
5) 3.60,3.70: Failure of in-memory transfer if the transfer involves a
dynamic area at a high address.
6) 3.60,3.70: System centisecond timing reference and system clock can run
a few percent fast or slow for periods of about an hour.
7) 3.60: Floppy discs cannot be formatted if the hard disc is locked.
Installing patches for RISC OS 3.60
-----------------------------------
If you have used any previous form of ROM patching for RISC OS
3.60, remove it from your !Boot first.
The patches are easily installed by copying the supplied Obey file
!!ROMPatch and the supplied directory (with contents) ROMPatch
into your
!Boot.Choices.Boot.Tasks
directory. To do this, open !Boot by holding down the Shift key
while double-clicking on !Boot. Next, double-click to open Choices,
then Boot, then Tasks. Now drag !!ROMPatch and ROMPatch into
Tasks.
Finally, restart your machine to activate the patches. You will
notice a new dynamic area 'ROM patches 3.60/1' in the task bar
display, if you click on the Acorn iconbar icon.
Installing patches for RISC OS 3.70
-----------------------------------
The patches are easily installed by copying the supplied Obey file
!!ROMPatch and the supplied directory (with contents) ROMPatch
into your
!Boot.Choices.Boot.PreDesk
directory. To do this, open !Boot by holding down the Shift key
while double-clicking on !Boot. Next, double-click to open Choices,
then Boot, then Predesk. Now drag !!ROMPatch and ROMPatch into
Predesk.
If you have used the previous release of ROMPatch (2.01), this will
update it.
Finally, restart your machine to activate the patches. You will
notice a new dynamic area 'ROM patches 3.70/2' in the task bar
display, if you click on the Acorn iconbar icon.